Commercial Aluminum Blank Posts for stair stepping

Stair-stepping fence panels requires longer posts because you’re connecting 2 panels at two different heights. Blank Posts can be trimmed at the bottom (for in-ground applications) and at the top (for surface mount applications. i.e. posts with the welded plate added). Note: Posts are not sold in pairs; all posts are sold individually. view images

Most jurisdictions in the USA require your posts to be cemented 2 feet into the ground. Some jurisdictions with frost lines require posts to be cemented 3 feet into the ground. Always check your local building codes.

Order post(s) 1 – 2 feet longer than the height of your fence panel or gate (depending on the size of your step. After installation, you can trim this post +plate (Blank Posts Only) from the top->down. Then, gently install post cap on top of the cut. Anchors to be purchased locally based upon the material you’re mounting to. For slight terrain variations, shim the post. For medium/steep slopes, purchase post with no plate and core drill. view plate specifications

Order post(s) 1 – 2 feet longer than the height of your fence panel or gate (depending on the size of your step. After installation, trim post height (Blank Posts Only) from the top, then, gently install post cap on top of the cut. Anchors to be purchased locally based upon the material you’re mounting to. For slight terrain variations, use shim the post. For medium/steep slopes, purchase post with no plate and core drill.Note: Plate Covers are not available for 4” x 4” Posts.view plate specificationsview plate specifications

2604-5 premium, powder-coat. Gloss = smooth finish. Satin = textured finish. Rust Free, Lifetime Warranty! White Gloss, White Satin, and Khaki Satin require additional lead time. view image

View Images

View Images