Industrial Aluminum Blank Posts for stair stepping

Stair-stepping fence panels requires longer posts because you’re connecting 2 panels two different heights. Blank Posts can be trimmed at the bottom (for in-ground applications) and at the top (for surface mount applications. i.e. posts with the welded plate added). Note: Posts are not sold in pairs; all posts are sold individually.View Images

Order post(s) 1 – 2 FEET LONGER than the height of your fence panel or gate (depending on the size of your step. After installation, trim this post (Blank Posts Only) from the top, then, gently install post cap on top of the cut. Anchors to be purchased locally based upon the material you’re mounting to. Wait until you receive the product(s), then purchase with product in-hand. For slight terrain variations, use stainless steel washers (purchased locally) to shim the post. For steeper slopes, purchase post with No Plate and core drill. Posts with welded plates added are not available for fence panels or gates above 7 feet high.view plate specifications

Note: Plate Covers are not available for 4″ x 4″ Posts. Order post(s) 1 – 2 FEET LONGER than the height of your fence panel or gate (depending on the size of your step. After installation, trim this post (Blank Posts Only) from the top, then, gently install post cap on top of the cut. Anchors to be purchased locally based upon the material you’re mounting to. Wait until you receive the product(s), then purchase with product in-hand. For slight terrain variations, use stainless steel washers (purchased locally) to shim the post. For steeper slopes, purchase post with No Plate and core drill. Posts with welded plates added are not available for fence panels or gates above 7 feet high.view plate specifications

2604-5 premium, powder-coat. Gloss = smooth finish. Satin = textured finish. Rust Free, Lifetime Warranty! White Gloss, White Satin, and Khaki Satin require additional lead time. view image

View Images