End Posts are factory-routed on 1 of the 4 sides of this post so that you can insert and set the rails of one GreatFence fence panel — to start or end a fence run. Insert, Set and Forget! Mounts not required. Stainless steel panel-to-post connection screws are automatically included with this post purchase. Posts are not sold in pairs; all posts are sold individually.View Images
Most jurisdictions require your posts to be cemented 2 feet into the ground unless your area has a frost line issue which typically requires 3 feet into the ground. Check your local building codes to be sure.
Must Order post(s) 3 INCHES LONGER than the height of your fence panel (required). Leaves approx. two inches of space between the fence and the ground). Anchors to be purchased locally based upon the material you’re mounting to. Wait until you receive the product(s), then purchase with product in-hand. For slight terrain variations, use stainless steel washers (purchased locally) to shim the post. For steeper slopes, purchase post with No Plate and core drill. view plate specifications
Note: Plate Covers are not available for 4″ X 4″ Posts. Must Order post(s) 3 INCHES LONGER than the height of your fence panel (required). Leaves approx. two inches of space between the fence and the ground). Anchors to be purchased locally based upon the material you’re mounting to. Wait until you receive the product(s), then purchase with product in-hand. For slight terrain variations, use stainless steel washers (purchased locally) to shim the post. For steeper slopes, purchase post with No Plate and core drill. view plate specifications
2604-5 premium, powder-coat. Gloss = smooth finish. Satin = textured finish. Rust Free, Lifetime Warranty! White Gloss, White Satin, and Khaki Satin require additional lead. view image
