Order 4″ x 4″ Gate Posts + Adjustable Heavy Duty Gate Hinges only for Commercial Single Gates 7 feet wide and wider and Commercial Double Swing Gates 14 feet wide and wider. Posts are not sold in pairs; all posts are sold individually. Gate Posts are not pre-drilled for hinges / latch. view images
Cement posts 2 – 3 feet into the ground. Always check your local building codes. You must use 4″ x 4″ Gate Posts with any gate configured with Heavy Duty Gate Hinges. Heavy Duty Gate Hinges will not work with smaller posts.
All Posts with welded plate (except posts for heavy racked and stair-stepped fence panels) must be ordered 3 inches longer than the height of your fence panel/gate. This leaves approx. two inches of space between the fence panel / gate and the ground). Anchors to be purchased locally based upon the material you’re mounting to. For slight terrain variations, shim the post. For medium/steep slopes, purchase post with no plate and core drill.view plate specifications
All Posts with welded plate (except posts for heavy racked and stair-stepped fence panels) must be ordered 3 inches longer than the height of your fence panel/gate. This leaves approx. two inches of space between the fence panel / gate and the ground). Anchors to be purchased locally based upon the material you’re mounting to. For slight terrain variations, shim the post. For medium/steep slopes, purchase post with no plate and core drill. Note: Plate Covers are not available for 4” x 4” Posts.view plate specifications
2604-5 premium, powder-coat. Gloss = smooth finish. Satin = textured finish. Rust Free, Lifetime Warranty! White Gloss, White Satin, and Khaki Satin require additional lead time. view image
You need 2 gate posts for each gate: 2 BLANKS, 2 ENDS OR 1 OF EACH. BLANK Gate Posts are square, aluminum, powder coated posts with no holes routed in them. An END Gate Post is routed on one side and connects to one fence panel in line with the gate or at 90 degrees. i.e. a Gate Post – END can “act” as a corner post if your gate is positioned at a corner of your barrier. View Tutorial
