Description
NOTE: Depending on the height of your fence panel steps, we recommend ordering posts longer than usual to allow enough room on your post(s) to connect two fence panels stair-stepped. Blank Posts cemented into the ground can be trimmed at the top or bottom, if necessary. Blank posts with the welded plate can be easily trimmed on-site from the top with the post cap covering the "cut". Rail End Mounts (sold separately) are required when stair stepping aluminum fence panels
| FENCE HEIGHT |
Post Cemented in Ground Minimum recommendation. Go longer if your jurisdiction has a frost line. Always check your local codes. |
Post with Welded Plate Welded plate not compatible with stair-stepped panels over 6'high. Core drilling required for 7'–8' heights. |
|---|---|---|
| 4' high | Any post 6'–7' long | Any post 57"–63" long |
| 5' high | Any post 7'–8' long | Any post 72"–84" long |
| 6' high | Any post 8'–9' long | Any post 84" long (max) |
| 7' high | Any post 10'–11' long | Plate not available Must core drill |
| 8' high | Any post 11' long | Plate not available Must core drill |
Oder these posts longer than usual so that you have enough product to connect two aluminum fence panels at two different heights. Check local building codes for post depth requirements. Rail End ounts (sold separatelY) are required to connect two fence panels to this post at two different heights
Posts 9 feet long and longer trigger oversized LTL Freight shipping fees which will be itemized in your shopping cart. GreatFence.com makes no profit off of shipping.
