blank, non-routed aluminum posts for stair stepping aluminum fence panels

Residential Aluminum Blank Posts for stair stepping

$0.00

Post Configuration *

Stair stepping is connecting two fence panels to one post at 2 different heights. Rail End Mounts (sold separately in Accessories) based upon the number of horizontal rails in your fence panel configuration and the total number of connection points. Note: Posts are not sold in pairs; all posts are sold individually. Rail End mounts sold separately. See: ALUMINUM FENCE PANELS PRICING > Accessories View Images

Pricing Per Post (size, thickness, length) *

Most jurisdictions in the USA require your posts to be cemented 2 feet into the ground. 3 feet for jurisdictions with frost lines. Always check your local building codes.

Pricing Per Post (size, thickness, length) *

Order post(s) 1 – 2 FEET LONGER than the height of your fence panel or gate (depending on the size of your stair step. After installation, you can trim this post +plate (Blank Posts Only) from the top -> down. Then, gently install post cap on top of the cut. Anchors to be purchased locally based upon the material you’re mounting to. For slight terrain variations, shim the post. For steeper slopes, purchase post with NO PLATE and core drill. View Plate Specifications

Pricing Per Post (size, thickness, length) *

Order post(s) 1 – 2 FEET LONGER than the height of your fence panel or gate (depending on the size of your stair step. After installation, you can trim this post +plate (Blank Posts Only) from the top -> down. Then, gently install post cap on top of the cut. Anchors to be purchased locally based upon the material you’re mounting to. For slight terrain variations, shim the post. For steeper slopes, purchase post with NO PLATE and core drill. View Plate Specifications

Color *

2604-5 premium, powder-coat. Gloss = smooth finish. Satin = textured finish. Rust Free, Lifetime Warranty! White Gloss, White Satin, and Khaki Satin require additional lead time. View Images

Post Cap *

View Images

Post Cap *

View Images

Description

Description

FENCE HEIGHT	Cemented in Ground Std. depth = 2 feet but you must go longer when stair stepping.	Post with Welded Plate Go longer because your stepping fence panels.
3' high	Any post 5' – ?' long	Any post 45" – ?" long
3.5' high	Any post 6' – ?' long	Any post 51" – ?" long
4' high	Any post 6' – ?' long	Any post 57" – ?" long
4.5' high	Any post 7' – ?' long	Any post 63" – ?" long
5' high	Any post 7' – ?' long	Any post 72" – ?" long
6' high	Any post 8' – ?' long	Any post 87" long

NOTE: For heavy racking, order posts longer than usual to ensure you have enough height to make your panel-to-post connections. After connecting the panel, trim from the top down and snap the post cap over the cut. This can only be done with Blank Posts. Rail End mounts (sold separately) are required to connect and stair-step residential aluminum fence panels.
Posts 9 feet long and longer trigger oversized LTL Freight shipping fees which will be itemized in your shopping cart. GreatFence.com makes no profit off of shipping.