Order two gate posts for each Residential Single Gate and each Residential Driveway Gate. Stainless steel panel-to-post connection screws are automatically included with the “punched” version of this post. Either post size will support all of our residential gates. Gate Posts are not sold in pairs; they’re sold individually.view images
Most jurisdictions in the USA require your posts to be cemented 2 feet into the ground. 3 feet for jurisdictions with frost lines. Always check your local building codes.
Order post(s) three inches longer than the height of your gate (required). Leaves approx. two inches of space between the gate and the ground). Anchors to be purchased locally based upon the material you’re mounting to. For slight terrain variations, shim the post. For steeper slopes, purchase post with no plate and core drill. Posts are never sold in pairs; all posts are sold individually.view plate specifications
Order post(s) three inches longer than the height of your gate. Leaves approx. two inches of space between the gate and the ground. Anchors to be purchased locally based upon the material you’re mounting to. For slight terrain variations, shim the post/plate. For steeper slopes, core drill. All posts are sold individually.view plate specifications
2604-5 premium, powder-coat. Gloss = smooth finish. Satin = textured finish. Rust Free, Lifetime Warranty! White Gloss, White Satin, and Khaki Satin require additional lead time. view images
You need 2 gate posts for each gate: 2 BLANKS, 2 ENDS OR 1 OF EACH. BLANK Gate Posts are square, aluminum, powder coated posts with no holes routed in them. An END Gate Post is routed on one side and connects to one fence panel in line with the gate or at 90 degrees. i.e. a Gate Post – END can “act” as a corner post if your gate is positioned at a corner of your barrier. view tutorial
